Ricoh Aficio MP C3001 Service Manual page 1349

Copy resolution settings are fixed so they are not counted.
The Fax application does not allow finely-adjusted resolution settings so no count is done
for the Fax application.
8 381 T:Total PrtPGS
8 382 C:Total PrtPGS
8 383 F:Total PrtPGS
8 384 P:Total PrtPGS
8 385 S:Total PrtPGS
8 386 L:Total PrtPGS
8 387 O:Total PrtPGS
When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
When several documents are merged for a print job, the number of pages stored are
counted for the application that stored them.
These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports,
etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
LSize PrtPGS
These SPs count pages printed on paper sizes A3/DLT and larger.
8 391
Note: In addition to being displayed in the SMC Report, these counters
are also displayed in the User Tools display on the copy machine.
SM Appendix
*CTL
These SPs count the number of pages printed
by the customer. The counter for the
*CTL
application used for storing the pages
*CTL
increments.
[0 to 9999999/ 0 / 1]
*CTL
The L: counter counts the number of pages
stored from within the document server mode
*CTL
screen at the operation panel. Pages stored
*CTL
with the Store File button from within the Copy
mode screen go to the C: counter.
*CTL
*CTL [0 to 9999999/ 0 / 1]
3-369
System SP8-xxx
D086/D087