Ricoh Aficio MP C3001 Service Manual page 1022

System SP2-xxx
015 PCU:Thick 2&FINE
016 HVP:Plain
017 HVP:Thick 1
018 HVP: Thick 2&FINE
[Charge AC Voltage] Charge Roller AC Voltage Adjustment
(Paper Type, Process Speed, Color)
Paper Type –> Plain, Thick 1, Thick 2
Plain: High speed, Thick 1: Middle speed, Thick 2&FINE: Low speed
2006
Adjusts the AC component of the charge roller bias in the various print modes.
Charge bias (AC component) is adjusted by environment correction
(SP2-007-xxx to SP2-011-xxx). These SPs are activated only when SP2-012-1
is set to "1: manual control".
001 Plain: Bk
002 Plain: M
003 Plain: C
004 Plain: Y
005 Thick 1: Bk
006 Thick 1: M
007 Thick 1: C
008 Thick 1: Y
009 Thick 2&FINE: Bk
010 Thick 2&FINE: M
011 Thick 2&FINE: C
012 Thick 2&FINE: Y
D086/D087
*ENG [–100 to 100 / -28 / 1 –V/step]
*ENG
[–100 to 100 / 20 / 1 –V/step]
*ENG
[–100 to 100 / 20 / 1 –V/step]
*ENG
[–100 to 100 / 29 / 1 –V/step]
*ENG [0 to 3 / 1.9 / 0.01 KV/step]
*ENG [0 to 3 / 2.2 / 0.01 KV/step]
*ENG [0 to 3 / 2.2 / 0.01 KV/step]
*ENG [0 to 3 / 2.2 / 0.01 KV/step]
*ENG [0 to 3 / 1.9 / 0.01 KV/step]
*ENG [0 to 3 / 2.2 / 0.01 KV/step]
*ENG
[0 to 3 / 2.2 / 0.01 KV/step]
*ENG
[0 to 3 / 2.2 / 0.01 KV/step]
*ENG
[0 to 3 / 1.9 / 0.01 KV/step]
*ENG [0 to 3 / 2.2 / 0.01 KV/step]
*ENG [0 to 3 / 2.2 / 0.01 KV/step]
*ENG [0 to 3 / 2.2 / 0.01 KV/step]
3-42 SM Appendix