Ricoh Aficio MP C3001 Service Manual page 1200

System SP4-xxx
[ACC Data Display]
This SP outputs the final data read at the end of ACC execution.
4902
A zero is returned if there was an error reading the data.
[0 to 255 / 0 / 1 /step]
001 R DATA1
002 G DATA1
003 B DATA1
004 R DATA2
005 G DATA2
006 B DATA2
[Dither Selection] DFU
4905
Changes the parameters for error diffusion.
001 Dither Selection
[Manual Gamma Adj]
Adjusts the offset data of the printer gamma for yellow in Photo mode.
4918
See "Printer Gamma Correction" in the Replacement and Adjustment for how
to use.
009 -
D086/D087
*ENG Photo C Patch Level 1 (8-bit)
*ENG Photo M Patch Level 1 (8-bit)
*ENG Photo Y Patch Level 1 (8-bit)
*ENG Photo C Patch Level 17 (8-bit)
*ENG Photo M Patch Level 17(8-bit)
*ENG Photo Y Patch Level 17 (8-bit)
*ENG [0 to 255 / 0 / 1 /step]
Enter the manual gamma adjustment
screen (-001 to 008). For details, see the
-
"Printer Gamma Correction" in the section
"Replace and Adjustment".
3-220 SM Appendix