Ricoh Aficio MP C3001 Service Manual page 1057

[Development DC Vias] Development DC Bias Adjustment
Adjusts the development bias.
Development bias is automatically adjusted during process control; therefore,
adjusting these settings has no effect while Process Control (SP3-041-001
2229
Default: ON) is activated.
After deactivating Process Control with SP3-041-001, the values in these SP
modes are used for printing.
Plain: High speed, Thick 1: Middle speed, Thick 2&Fine: Low speed
001 Plain: Bk
002 Plain: M
003 Plain: C
004 Plain: Y
005 Thick 1: Bk
006 Thick 1: M
007 Thick 1: C
008 Thick 1: Y
009 Thick 2&FINE:Bk
010 Thick 2&FINE:M
011 Thick 2&FINE:C
012 Thick 2&FINE:Y
[Temperature/Humidity: Display]
2241
Displays the environment temperature and humidity.
001 Temperature
002 Relative Humidity
003 Absolute Humidity
SM Appendix
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 800 / 550 / 10 –V/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
- [–1280 to 1270 / - / 0.1deg/step]
- [0 to 1000 / - / 0.1 %RH/step]
- [0 to 100 / - / 0.01 g/m
3-77
System SP2-xxx
3
/step]
D086/D087