[Special 3: Leading Edge Correction] Special 3 Paper: Leading Edge
Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2871
edge in each mode. SP2852 and SP2857 are multiplied by these SP values.
Plain: High speed, 1200: Low speed
The paper leading edge area can be adjusted with SP2872.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2851 is multiplied by these SP values.
005-008
The paper leading edge area can be adjusted with SP2872.
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 1200: 1st Side
[Special 3: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2872
plate at the paper leading edge between the erase margin area and the image
area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
SM Appendix
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
3-127
System SP2-xxx
D086/D087