005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 1200: 1st Side
[Special 2: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2822
plate at the paper leading edge between the erase margin area and the image
area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 1200: 1st Side
[Special 2: Trailing Edge Correction] Special 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2803 and SP2807 are multiplied by these SP values.
2823
Plain: High speed, 1200: Low speed
The paper trailing edge area can be adjusted with SP2824.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 1200: 1st Side
SM Appendix
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
3-123
System SP2-xxx
D086/D087