Ricoh Aficio MP C3001 Service Manual page 1039

[Area Shad. Correct. Setting] FA
Adjusts the area correction value for each LD power.
The main scan is divided into 16 areas. However, the image areas are limited
from area 1 to area 14.
2152
For BK and Magenta, area 1 is at the rear side of the machine (left side of the
image) and area 14 is at the front side of the machine (right side of the image).
For Cyan and Yellow, area 1 is at the front side of the machine (right side of the
image) and area 14 is at the rear side of the machine (left side of the image).
001 Area 0: Bk
002 Area 1: Bk
003 Area 2: Bk
004 Area 3: Bk
005 Area 4: Bk
006 Area 5: Bk
007 Area 6: Bk
008 Area 7: Bk
009 Area 8: Bk
010 Area 9: Bk
011 Area 10: Bk
012 Area 11: Bk
013 Area 12: Bk
014 Area 13: Bk
015 Area 14: Bk
016 Area 15: Bk
033 Area 0: M
SM Appendix
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
This is for the synchronizing detection
*ENG board.
[50 to 150 / 100 / 1 %/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
This is out of the image area.
*ENG
[50 to 150 / 100 / 1 %/step]
This is for the synchronizing detection
*ENG
board.
3-59
System SP2-xxx
D086/D087