Ricoh Aficio MP C3001 Service Manual page 1201

4954 [Read/Restore Std]
001 Read New Chart
002 Recall Prev Chart
003 Read Std Chart
004 Set Std Chart
4958
[Read/Restore Std: Rear] Not used
[IPU Image Path Selection ]
4991
Selects the image path.
Enter the number to be selected using the 10-key pad.
RGB Frame Memory
0: Scanner input RGB images
1: Scanner I/F RGB images
001
2: RGB images done by Shading correction (Shading ON, Black offset ON)
3: Shading data
4 to 11: Not used
4993 [High Light Correction]
001 Sensitivity Selection
002 Range Selection
SM Appendix
- Execute the scanning of the A4 chart.
- Clear the data of the scanned A4 chart.
Execute the scanning of the A4 standard
-
chart.
- Overwrite the standard data.
*ENG [0 to 11 / 2 / 1 /step ]
Selects the Highlight correction level.
[0 to 9 / 4 / 1 /step]
*ENG
0: weakest sensitivity
9: strongest sensitivity
Selects the range level of Highlight
correction.
*ENG
[0 to 9 / 4 / 1 /step]
0: weakest skew correction,
9: strongest skew correction
3-221
System SP4-xxx
D086/D087