Ricoh Aficio MP C3001 Service Manual page 1276

System SP5-xxx
[Cherry Server]
5974
Specifies which version of ScanRouter, "Lite" or "Full", is installed.
001 Cherry Server
[Device Setting]
The NIC and USB support features are built into the GW controller. Use this
5985
SP to enable and disable these features. In order to use the NIC and USB
functions built into the controller board, these SP codes must be set to "1".
001 On Board NIC
002 On Board USB
5987 [Mech. Counter]
001 0: OFF / 1: ON
D086/D087
[0 or 1 / 0 / – ]
*CTL
0: Lite
1: Full
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board NIC" is
limited only for the NRS or LDAP/NT authentication.
Other network applications than NRS or
LDAP/NT authentication are not available when
this SP is set to "2". Even though you can change
the initial settings of those network applications,
the settings do not work.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
This SP detects that a mechanical counter device is
removed. If it is detected, SC610 occurs.
3-296 SM Appendix