Ricoh Aficio MP C3001 Service Manual page 1010

System SP1-xxx
160 Pressure:Thin:Low Speed
Pressure:Thick4
Sets the default pressure position of the fusing unit for thick 4 paper.
0: Depression position (no pressure)
161
1: Position 1 (less pressure)
2: Position 2
3: Position 3 (strongest pressure)
Filler Edge Detection Counter
201
Displays the detection time for the edge of the pressure roller actuator.
1152 [Fusing Nip Band Check]
001 Execute
Executes the nip band measurement between heating roller and pressure roller.
If the nip band width is not 8 mm, and fusing is not good, replace the pressure
roller or install a new fusing unit.
Pre-Idling Time
002
Specifies the fusing rotation time before executing SP1109-001.
Stop Time
003
Specifies the time for measuring the nip.
Pressure Position
004
Specifies the pressure position for measuring the nip.
D086/D087
*ENG
[0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
ENG [0 to 9,000,000 / - / 1 /step]
-
[0 or 1 / 0 / 1]
*ENG [0 to 255 / 240 / 1 sec/step]
* ENG
[5 to 30 / 20 / 1 sec/step]
* ENG [1 to 3 / 3 / 1 ]
3-30 SM Appendix