Ricoh Aficio MP C3001 Service Manual page 996

System SP1-xxx
Correction:Sp.
Job High Temp.
008
Correction:Sp.
1112 [Repeat Temperature Correction]
Control Time 1
001
Specifies the threshold time for entering the repeat temperature correction
mode after the first sheet of paper has reached to the registration roller.
Control Time 2
002
Specifies the threshold time for entering the repeat temperature correction
mode after the control time 1 (specified with SP1112-001) has elapsed.
Temp.:Plain:Center:1
Specifies the correction temperature of the heating roller for plain paper when
003
the operation time of the machine is in the interval between control time 1 and
control time 2.
Temp.:Plain:Press:1
Specifies the correction temperature of the pressure roller for plain paper when
004
the operation time of the machine is in the interval between control time 1 and
control time 2.
Temp.:Plain:Center:2
005
Specifies the correction temperature of the heating roller for plain paper when
the operation time of the machine is more than control time 2.
Temp.:Plain:Press:2
006
Specifies the correction temperature of the pressure roller for plain paper when
the operation time of the machine is more than control time 2.
D086/D087
*ENG [0 to 100 / 0 / 0.1 deg/step]
*ENG
[0 to 300 / 100 / 1 sec/step]
*ENG [0 to 300 / 300 / 1 sec/step]
*ENG [-15 to 15 / 0 / 0.1 deg/step]
*ENG [-10 to 10 / 0 / 0.1 deg/step]
*ENG
[-15 to 15 / -5 / 0.1 deg/step]
*ENG [-10 to 10 / 0 / 0.1 deg/step]
3-16 SM Appendix