Ricoh Aficio MP C3001 Service Manual page 1001

Press Reference Temp.
041
Specifies the standard temperature for the pressure roller during the heat
storage FB control.
Temp. Correction Lower
Limit
042
Specifies the lower llimit temperature for the heat storage FB control.
Temp. Correction Upper
Limit
043
Specifies the upper llimit temperature for the heat storage FB control.
Paper Thickness
Coefficient:Plain1
051
Specifies the additional temperatreu to the heat strage FB control for plain
paper 1.
Paper Thickness
Coefficient:Plain2
052
Specifies the additional temperatreu to the heat strage FB control for plain
paper 2.
1121 [Switch:Rotation Start/Stop]
Time:After Reload
001
Specifies the ON time of the pressure roler lamp after the fusing temperature
has reached the reload temperature.
Time:After Recovery
002
Specifies the ON time of the pressure roler lamp after the fusing temperature
has reached the target temperature.
Time:After Job
003
Specifies the ON time of the pressure roler lamp after the paper feeding has
finished.
004 Press Temp.:After Reload *ENG
SM Appendix
*ENG [0 to 200 / 80 / 1 deg/step]
*ENG [-30 to 0 / -2 / 1 deg/step]
*ENG
[0 to 30 / 0 / 1 deg/step]
*ENG [0 to 100 / 20 / 1 /step]
*ENG [0 to 100 / 20 / 1 /step]
*ENG
[0 to 100 / 60 / 1 sec/step]
*ENG [0 to 100 / 15 / 1 sec/step]
*ENG
[0 to 100 / 0 / 1 sec/step]
[0 to 160 / 160 / 1 deg/step]
3-21
System SP1-xxx
D086/D087