Ricoh Aficio MP C3001 Service Manual page 1213

5212 [Page Numbering]
This program adjusts the position of the second side page numbers.
A "– value" moves the page number positions to the left edge. A "+ value"
moves the page number positions to the right edge.
003 Duplex Printout Right/Left Position
004 Duplex Printout High/Low Position
[Set Time]
Adjusts the RTC (real time clock) time setting for the local time zone.
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.)
DOM: +540 (Tokyo)
5302
NA: -300 (New York)
EU: + 60 (Paris)
CH: +480 (Peking)
TW: +480 (Taipei)
AS: +480 (Hong Kong)
002 Time Difference
5307 [Summer Time]
Setting
001
Enables or disables the summer time mode.
Make sure that both SP5-307-3 and -4 are correctly set. Otherwise,
this SP is not activated even if this SP is set to "1".
Rule Set (Start)
Specifies the start setting for the summer time mode.
003
There are 8 digits in this SP. For months 1 to 9, the "0" cannot be input in the
first digit, so the eight-digit setting for -2 or -3 becomes a seven-digit setting.
SM Appendix
*CTL
[–10 to 10 / 0 / 1 mm/step]
[–10 to 10 / 0 / 1 mm/step]
*CTL# [-1440 to 1440 / Area / 1 min./step ]
[ 0 to 1 / NA, EU, ASIA / 1 /step]
0: Disabled
-
1: Enabled
NA and EUR: 1, ASIA: 0
-
3-233
System SP5-xxx
D086/D087