Ricoh Aficio MP C3001 Service Manual page 1079

[Thick 1: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2522
plate at the paper leading edge between the erase margin area and the image
area.
Thick 1: Middle speed, 1200: Low speed
Paper Transfer: Thick 1: 1st
001
Side
Paper Transfer: Thick 1: 2nd
002
Side
Separation DC: Thick 1: 1st
005
Side
Separation DC: Thick 1: 2nd
006
Side
[Thick 1: Trailing Edge Correction] Thick 1 Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2502 and SP2507 are multiplied by these
2523
SP values.
Thick 1: Middle speed, 1200: Low speed
The paper trailing edge area can be adjusted with SP2524.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
005 Paper Transfer: Plain: 1st Side
006 Paper Transfer: Plain: 2nd Side
007 Paper Transfer: 1200: 1st Side
SM Appendix
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
3-99
System SP2-xxx
D086/D087