Ricoh Aficio MP C3001 Service Manual page 1072

System SP2-xxx
005 Separation DC: Plain: 1st Side
007 Separation DC: 1200: 1st Side
[Thin: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2472
plate at the paper leading edge between the erase margin area and the image
area.
Plain: High speed, 1200: Low speed,
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
007 Separation DC: 1200: 1st Side
[Thin: Trailing Edge Correction] Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2453 and SP2457 are multiplied by these
2473
SP values.
Plain: High speed, 1200: Low speed
The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
007 Separation DC: 1200: 1st Side
D086/D087
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
3-92 SM Appendix