Ricoh Aficio MP C3001 Service Manual page 1209

5148 Size Detection Off
001 Enables or disables the automatic paper size detection for the by-pass tray.
5150 [By-Pass Length Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
001 Normally the paper length for sub scanning paper from the by-pass tray is
limited to 600 mm, but this can be extended with this SP to 1260 mm.
5162 [App. Switch Method]
001 This program specifies the switch that selects an application program.
[Fax Printing Mode at Optional]
Enables or disables the automatic print out without an accounting device. This
5167
SP is used when the receiving fax is accounted by an external accounting
device.
Fax Printing Mode at
001
Optional Counter Off
[CE Login]
5169
If you will change the printer bit switches, you must 'log in' to service mode with
this SP before you go into the printer SP mode.
001 CE Login
SM Appendix
[0: OFF/ 1: ON]
*CTL 0: OFF (Detect)
1: ON (Not Detect)
*CTL
[0: OFF/ 1: ON]
*CTL [0: Soft Key Set/ 1: Hard Key Set]
[0 or 1 / 0 / - ]
*CTL 0: Automatic printing
1: No automatic printing
[0 or 1 / 0 / - ]
*CTL 0: Disabled
1: Enabled
3-229
System SP5-xxx
D086/D087