Ricoh Aficio MP C3001 Service Manual page 1589

Code Meaning
15-71 Not Binary Image Data
15-73 MDN Status Error
15-74 MDN Message ID Error
15-80 Mail Job Task Read Error
Repeated Destination
15-81
Registration Error
15-91 Send Registration Error
15-92 Memory Overflow
15-93 Memory Access Error
15-94 Incorrect ID Code
SM
Suggested Cause/Action
The file could not be received because the
attachment was not binary image data.
Could not find the Disposition line in the
header of the Return Receipt, or there is a
problem with the firmware.
Could not find the Original Message ID line in
the header of the Return Receipt, or there is a
problem with the firmware.
Could not receive the transmission because
the destination buffer is full and the destination
could not be created (this error may occur
when receiving a transfer request or a request
for notification of reception).
Could not repeat receive the transmission
because the destination buffer is full and the
destination could not be created (this error
may occur when receiving a transfer request
or a request for notification of reception).
Could not receive the file for transfer to the final
destination:
The format of the final destination or the
transfer destination is incorrect.
Destinations are full so the final and transfer
destinations could not be created.
Transmission could not be received because
memory overflowed during the transaction.
Transaction could not complete due to a
malfunction of SAF memory.
The machine rejected an incoming e-mail for
transfer request, because the ID code in the
41
Error Codes
D393