Ricoh Aficio MP C3001 Service Manual page 1279

3.6 SYSTEM SP6-XXX
3.6.1 SP6-XXX (PERIPHERALS)
6006 [ADF Adj.] ADF Adjustment
Adjusts the side-to-side and leading registration of originals with the ARDF.
001 Side-to-Side Registration
Side-to-Side Registration
002
(2nd side)
Leading Edge
003
Registration
Adjusts the amount of paper buckle to correct original skew for the front and
rear sides.
005 Buckle: Duplex Front
006 Buckle: Duplex Rear
Adjusts the erase margin at the original trailing edge.
007 Rear Edge Erase
[ADF Input Check]
6007
Displays the signals received from the sensors and switches of the ARDF. Only
Bit 0 is used for ADF input check (
[ADF Output Check]
Activates the electrical components for functional check.
6008
It is not possible to activate more than one component at the same time (
p.3-399 "Input and Output Check").
6009 [ADF Free Run]
SM Appendix
[-3.0 to 3.0 / 0 / 0.1 mm/step ]
*ENG
[-5.0 to 5.0 / 0 / 0.1 mm/step ]
[-3.0 to 3.0 / 0 / 0.1 mm/step ]
*ENG
[-2.5 to 2.5 / 0 / 0.1 mm/step ]
*ENG
[-10 to 10 / 0 / 0.1 mm/step ]
p.3-399 "Input and Output Check").
3-299
System SP6-xxx
D086/D087