Ricoh Aficio MP C3001 Service Manual page 1343

ADF Org Feeds
8 221
These SPs count the number of pages fed through the ADF for front and
back side scanning.
8 221 1 Front
8 221 2 Back
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
Scan PGS/Mode
8 231
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
8 231 1 Large Volume
8 231 2 SADF
8 231 3 Mixed Size
SM Appendix
*CTL [0 to 9999999/ 0 / 1]
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front
side count is the same as the number of pages fed for either
simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the
Front side count is the same as the number of pages fed for
duplex front side scanning. (The front side is determined by which
side the user loads face up.)
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex
scanning.
With an ADF that cannot scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex
rear-side scanning.
*CTL [0 to 9999999/ 0 / 1]
Selectable. Large copy jobs that cannot be
loaded in the ADF at one time.
Selectable. Feeding pages one by one through
the ADF.
Selectable. Select "Mixed Sizes" on the operation
panel.
3-363
System SP8-xxx
D086/D087