Ricoh Aficio MP C3001 Service Manual page 1124

System SP3-xxx
Toner Supply Coefficient
008
Adjusts the time for the toner supply mode when a toner density is detected to
be low.
Consumption pattern: Bk
009
Specifies the belt mark generating time for checking the black toner density
when toner density is detected to be low at the toner density adjustment.
Consumption pattern: M
010
Specifies the belt mark generating time for checking the magenta toner density
when toner density is detected to be low at the toner density adjustment.
Consumption pattern: C
011
Specifies the belt mark generating time for checking the cyan toner density
when toner density is detected to be low at the toner density adjustment.
Consumption pattern: Y
012
Specifies the belt mark generating time for checking the yellow toner density
when toner density is detected to be low at the toner density adjustment.
T1 Bias: Bk
013
Adjusts the image transfer belt bias for Black.
T2 Bias: M
014
Adjusts the image transfer belt bias for Magenta.
T3 Bias: C
015
Adjusts the image transfer belt bias for Cyan.
T4 Bias: Y
016
Adjusts the image transfer belt bias for Yellow.
D086/D087
*ENG
[0 to 25.5 / 10 / 0.1 sec/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG
[0 to 255 / 5 / 1 time/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG
[0 to 80 / 22 / 1
*ENG
[0 to 80 / 25 / 1
*ENG [0 to 80 / 22 / 1
*ENG
[0 to 80 / 28 / 1
3-144
A/step]
A/step]
A/step]
A/step]
SM Appendix