Ricoh Aficio MP C3001 Service Manual page 1008

System SP1-xxx
1151 [Pressure Setting]
Pressure Change ON/OFF
001
Enables or disables the pressure switching control for the fusing unit.
0: OFF , 1: ON
Pressure Position1
002
Specifies the rotation time of the pressure roller contact motor for the pressure
position 1.
Pressure Position2
003
Specifies the rotation time of the pressure roller contact motor for the pressure
position 2.
Pressure Position3
004
Specifies the rotation time of the pressure roller contact motor for the pressure
position 3.
Depressure Position
005
Specifies the rotation time of the pressure roller contact motor for the
depression position (no pressure).
Shift Time
Specifies the timing for depressing the fusing unit. If the machine does not get
010
any jobs for specified time by this SP after copying or printing, the machine
depresses the fusing unit.
101 Pressure:Plain1/2
Sets the default pressure position of the fusing unit for each paper type in
normal speed.
0: Depression position (no pressure)
1: Position 1 (less pressure)
2: Position 2
3: Position 3 (strongest pressure)
D086/D087
*ENG [0 or 1 / 1 / -]
*ENG [0 to 10,000 / 420 / 10 msec/step]
*ENG [0 to 10,000 / 660 / 10 msec/step]
*ENG
[0 to 10,000 / 2130 / 10 msec/step]
*ENG [0 to 10,000 / 220 / 10 msec/step]
*ENG [0 to 3600 / 5 / 1 sec/step]
*ENG [0 to 3 / 3 / 1 /step]
3-28 SM Appendix