Ricoh Aficio MP C3001 Service Manual page 1286

System SP6-xxx
6143 [FIN (TIG) OUPUT Check] Finisher (B793) Output Check
Displays the signals received from sensors and switches of the booklet finisher.
( p.3-399 "Input and Output Check")
6144 [FIN (KIN) OUPUT Check] Finisher (B408) Output Check
Displays the signals received from sensors and switches of the booklet finisher.
( p.3-399 "Input and Output Check")
6145 [FIN (EUP) OUPUT Check] Not used
6146 [FIN (ELB) OUPUT Check] Finisher (D372) Output Check
Displays the signals received from sensors and switches of the 500-sheet
finisher. (
[Max. Pre-Stack Sheet]
This SP sets the number of sheets sent to the pre-stack tray.
6149
Note:
You may need to adjust this setting or switch it off when feeding thick or slick
paper.
001 -
[INPUT Check]
6150
Displays the signals received from sensors and switches of the bridge unit
(D386)/ side tray (D542) (
D086/D087
p.3-399 "Input and Output Check")
*ENG
[0 to 3 / 3 / 1 sheet/step]
p.3-399 "Input and Output Check").
3-306
Number of Pre-Stack Sheets
SM Appendix