Ricoh Aficio MP C3001 Service Manual page 1169

008 With Developer
009 Serial Number 1
010 Serial Number 2
011 Adjustment: Vt
012 Adjustment: Vtref
013 Adjustment: Vtcnt
014 Adjustment: Gamma
015 Adjustment: Vcnt Result
[Toner Collection Bottle Full Detection]
3800
Displays/ adjusts the toner collection bottle detection settings. These SPs are
used for NRS.
001 Condition
002 Detection Times
003 Print Page After Near Full
004 Pixel Count After Near Full
Pixel Count After
005
Replacement
008 Coefficient
Notice Setting
011
NOTE:
If the toner collection bottle has been replaced before the machine detects used
toner near full when this setting is set to "0", the machine cannot detect toner
collection bottle near full. In that case, set SP3-902-017 to "1".
SM Appendix
*ENG [0 to 5 / 1.3 / 0.1 V/step]
*ENG
[0 to 255 / - / 1 V/step]
*ENG
*ENG [0 to 5 / 3 / 0.1 V/step]
*ENG [0 to 5 / 3 / 0.1 V/step]
*ENG
[0 to 5 / 4 / 0.01 V/step]
*ENG
[0 to 2.55 / 0 / 0.01 mg/cm
*ENG
[0 to 9 / 9 / 1 /step]
*CTL [0 to 4 / 0 / 1 /step]
*CTL [0 to 50 / - / 1 /step]
*CTL [0 to 1000 / 0 / 1 sheet/step]
*CTL [0 to 200000 / - / 1 cm
Displays the pixel counter after
*CTL replacement of toner collection bottle.
[0 to 200000 / - / 1 cm
*ENG [0.5 to 1.5 / 1 / 0.1 /step]
Enables or disables the calling for
@Remote.
*ENG
[0 or 1 / 1 / - ]
0: Enable @Remote calling
1: Disable @Remote calling
3-189
System SP3-xxx
2
/kV /step]
2
/step]
2
/step]
D086/D087