Ricoh Aficio MP C3001 Service Manual page 1227

[SC/Alarm Setting]
With NRS (New Remote Service) in use, these SP codes can be set to issue
5515
an SC call when an SC error occurs. If this SP is switched off, the SC call is
not issued when an SC error occurs.
001 SC Call
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
006 Communication Test Call
007 Machine Information Notice
008 Alarm Notice
009 Non Genuine Toner Alarm
010 Supply Automatic Ordering Call
011 Supply Management Report Call
012 Jam/Door Open Call
[Individual PM Part
Alarm Call]
5516
With @Remote in use, these SP codes can be set to issue an PM alarm call
when one of SP parts reaches its yield.
Disable/Enable Setting (0: Not
001
send, 1: Send)
004 Percent yield for triggering PM alert [1 to 255 / 75 / 1 %/step]
5610 [Base Gamma Control Point: Command]
Get Factory Default
004
Recalls the factory settings.
SM Appendix
*CTL -
[0 or 1 / 1 / - ]
0: Off
1: On
[0 or 1 / 1 / - ]
0: Off
1: On
*CTL -
[0 or 1 / 1 / - ]
0: Not send, 1: Send
- -
3-247
System SP5-xxx
D086/D087