Ricoh Aficio MP C3001 Service Manual page 1235

Port 80 Enable
Controls if permission is given to get access to the SOAP method over Port
80 on the @Remote network.
011
[0 or 1 / 0 / – ]
0: No. Access denied
1: Yes. Access granted.
RFU Timing
Selects the timing for the remote firmware updating.
013
[0 or 1 / 1 / – ]
0: Any status of a target machine
1: Sleep or panel off mode only
RCG – C Registed
This SP displays the RCG-N installation end flag.
021
0: Installation not completed
1: Installation completed
RCG – C Regist Detail
This SP displays the RCG device installation status.
022
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Type (N/M)
This SP displays and selects the RCG-N connection method.
023
[0 or 1 / 0 / 1 /step
0: Internet connection
1: Dial-up connection
Cert. Expire Timing
061
DFU
062 Use Proxy
SM Appendix
-
Proximity of the expiration of the certification.
This SP setting determines if the proxy server is
used when the machine communicates with the
service center.
3-255
System SP5-xxx
D086/D087