Ricoh Aficio MP C3001 Service Manual page 1031

005 Color Selection
006 Density: Bk
007 Density: Ma
008 Density: Cy
009 Density: Ye
2111 [Forced Line Position Adj.]
001 Mode a
002 Mode b
003 Mode c
SM Appendix
Specifies the color for the test pattern.
[1 to 4 / 1 / 1/step]
-
1: All colors, 2: Magenta, 3: Yellow, 4:
Cyan
-
Specifies the color density for the test
pattern.
-
[0 to 15 / 15 / 1 /step]
-
0: Lightest density
15: Darkest density
-
Executes the fine line position adjustment
twice.
- If this SP is not completed (NG is
displayed), do SP2111-003 first and then try
this SP again.
Executes the fine line position adjustment
once.
-
If this SP is not completed, do SP2111-003
first and then try this SP again.
Executes the rough line position adjustment
once.
- After doing this SP, make sure to execute
SP2111-001 or -002. Otherwise, the line
position adjustment is not perfectly done.
3-51
System SP2-xxx
D086/D087