Ricoh Aficio MP C3001 Service Manual page 1122

System SP3-xxx
Set
Enables or disables the automatic process control prohibition.
Pre-ACC
004
Selects the process control mode that is done before ACC.
Pattern Calculation
Method
005
Selects the process control method.
3043 [TD Adjustment Mode]
Repeat Number: Power ON
Specifies the maximum number of repeats of the toner density adjustment at
power on.
0: Disabled, 1 to 3: Repeat number,
001
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low,
and toner is consumed only when the toner density is too dark.)
6 to 9: Disabled
Repeat Number: Initialization
Specifies the maximum number of repeats of the toner density adjustment at
the developer initialization.
0: Disabled, 1 to 3: Repeat number,
002
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low,
and toner is consumed only when the toner density is too dark.)
6 to 9: Disabled
D086/D087
0: Permit, 1: Forbid
[0 to 2 / 2 / 1/step]
0: Not Executed
*ENG 1: Process Control
2: TC Control (TD Adjustment)
3: Not used
[0 to 2 / 2 / 1/step]
0: FIXED
*ENG
1: INITIALIZED
2: CALCULATED
*ENG [0 to 9 / 4 / 1 time/step]
*ENG
3-142
[0 to 9 / 3 / 1 time/step]
SM Appendix