Ricoh Aficio MP C3001 Service Manual page 1071

[Thin: Paper Size Correction]
Adjusts the size correction coefficient for the paper transfer roller current for
2461
each paper size. SP2453 and SP2457 are multiplied by these SP values.
Plain: High speed
Paper Transfer: Plain: 1st Side:
001
S1
Paper Transfer: Plain: 1st Side:
005
S2
Paper Transfer: Plain: 1st Side:
009
S3
Paper Transfer: Plain: 1st Side:
013
S4
Paper Transfer: Plain: 1st Side:
017
S5
[Thin: Leading Edge Correction] Thin Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2453 and SP2457 are multiplied by these SP values.
2471
Plain: High speed, 1200: Low speed
The paper leading edge area can be adjusted with SP2472.
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: 1200: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2451 is multiplied by these SP values.
2471
The paper leading edge area can be adjusted with SP2472.
SM Appendix
[100 to 600 / 100 / 5%/step]
*ENG
S1 size > 297 mm (Paper width)
[100 to 600 / 120 / 5%/step]
*ENG 297 mm > S2 size > 275 mm
(Paper width)
[100 to 600 / 140 / 5%/step]
*ENG 297 mm > S2 size > 275 mm
(Paper width)
[100 to 600 / 160 / 5%/step]
*ENG 297 mm > S2 size > 275 mm
(Pape r width)
*ENG [100 to 600 / 180 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
3-91
System SP2-xxx
D086/D087