System SP2-xxx
[Thick 3: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2655
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Side
003 Paper Transfer: 2nd Side
004 Separation DC: 2nd Side
[Thick 3: Trailing Edge Correction] Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2656
edge in each mode. SP2651 and SP2652 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Side
004 Separation DC: 2nd Side
D086/D087
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
3-110
SM Appendix