Slots; Drives; Power Supplies; Drive Location Coordinates - IBM System Storage TS3310 Setup And Operator Manual

Slots

Fixed storage slots are represented by the third digit of the library location
coordinate. Slots are numbered from top to bottom within each column starting
with 1 at the top of the column.

Drives

Drives are addressed by module and drive bay within a module. The drive bays
within a module are numbered from top to bottom. A one-based numbering
system is used. The top drive bay is drive bay 1. A full address of a drive is of the
form [Module, Drive Bay], examples: [0,1], [-1,2].
Figure 1-7. Drive location coordinates

Power Supplies

Power supplies are addressed as [Module, PS#], where PS# is 1 for the left supply
and 2 for the right.
0
-1
0,1
0,2
-1, 1
-1, 2
-1, 3
-1, 4
Chapter 1. Product Description
1-13