Removing/Replacing the Compact Flash Card
The compact flash card stores firmware and other important data that pertains to
the drive and the library. The compact flash card is a component of a control
module and resides on the Library Control Blade (LCB).
In Figure 11-10, the area inside the white circle shows the location of compact flash
card on the LCB. A close-up of the compact flash card (see
shown in the detailed view of the same illustration.
Figure 11-10. LCB with compact flash card
The following information is stored on the compact flash card:
11-14
TS3310 Tape Library Setup and Operator Guide
1
2
Compact flash
card
1
3
Side-to-side
3
motion required to
remove card from
Library Control
Blade
1
in Figure 11-10) is
2
Card connector pins