Operator Panel; Power Button; Front Panel Leds - IBM System Storage TS3310 Setup And Operator Manual

If you want to restrict access to the library, lock the I/O Station door. To do this:
Attention: When any Access Door is opened, all in-progress motion commands
stop, the Picker lowers to the bottom of the library, and the library is taken offline
(the library must be put back online manually). When the Access Door is closed,
the library returns any media in the Picker to its original storage slot.

Operator Panel

The Operator Panel (
device located on the Access Door of the control module. Library operations and
service functions are performed from this screen.
The Web User Interface offers some of the same functionality as the Operator Panel
via a web browser which enables remote access to the library. For more
information on the Operator Panel and the Web User Interface, see Chapter 5,
"User Interfaces," on page 5-1.

Power Button

Pressing the Power Button (
control module turns the Picker and Operator Panel ON or OFF; however, power
is still applied to the power supplies. The Power Button is used during library
shutdown and to manually reboot the library.

Front Panel LEDs

Two LEDs are located on the front of the library to the right of the Power Button.
v Green power ON LED (
v Amber Operator Intervention Alert LED (
1-4
TS3310 Tape Library Setup and Operator Guide
From the Operator Panel: Operations → I/O Station Lock/Unlock
3
in Figure 1-1 on page 1-2) is the touchscreen display
indicates that the library power is ON.
lit, this LED indicates that there is a Library, Drives, or Media Operator
Intervention available. To access the Operator Intervention, select Tools →
Operator Intervention from the Operator Panel.
4
in Figure 1-1 on page 1-2) on the front panel of a
7
in Figure 1-1 on page 1-2): When lit, this LED
8
in Figure 1-1 on page 1-2): When