Cabling Of A 14U Library With Scsi Drives - IBM System Storage TS3310 Setup And Operator Manual

Module
1
communication
terminator
Module-to-
2
module
communication
cable
Ethernet cable
3
(customer
supplied)
3
2
Figure 9-9. Cabling of a 14U Library with SCSI Drives
Module
1
communication
terminator
Module-to-
2
module
communication
cable
Ethernet cable
3
(customer
supplied)
2. Unplug the cable.
3. Verify that there is no damage to any cable pins.
4. Securely plug in the cable.
5. Repeat this procedure for each cable connected to your library.
9-14
TS3310 Tape Library Setup and Operator Guide
Module communication
4
terminator
Power cord (upper
5
module)
Power cord (lower
6
module)
4
1
4
Module communication
terminator
5
SCSI terminators
6
SCSI drive-to-host cable
Fibre drive-to-network cables
7
5
9
7
Power cord
8
Power cord
9
SCSI drive-to-host cable
7
6
8