IBM System Storage TS3310 Setup And Operator Manual page 218

Figure 11-13. Gear rack
Verify that the front (
are properly aligned and positioned.
v In a control module, verify that the gear racks are in the down position. Pinch
v In an expansion module:
11-20
TS3310 Tape Library Setup and Operator Guide
1
3
1 2
Rear gear rack
locking
mechanism
3
the gear rack locking mechanism (
down. Ensure that the lock is not engaged in the hole in the frame.
– Verify that the gear racks are in the down position. Pinch the gear rack
locking mechanism (
that the lock is not engaged in the hole in the frame.
– Verify that there are no gaps in the gear racks between library units.
2
Magnification of
rear gear rack
locking
mechanism
in Figure 11-13) and rear (
2
in Figure 11-13) and push the gear rack
2
in Figure 11-13) and push the gear rack down. Ensure
3
Front gear rack
1
in Figure 11-13) gear racks