Ex4500 Chassis; Front Panel Of An Ex4500 Switch - Juniper EX4500 Hardware Manual

EX4500 Chassis

IN THIS SECTION
Front Panel of an EX4500 Switch | 35
Rear Panel of an EX4500 Switch | 36
LCD Panel in EX4500 Switches | 38
Virtual Chassis Module in EX4500 Switches | 44
Chassis Status LEDs in EX4500 Switches | 46
Management Port LEDs in EX4500 Switches | 47
Uplink Modules in EX4500 Switches | 48
Intraconnect Module in EX4500 Switches | 50
Network Port and Uplink Module Port LEDs in EX4500 Switches | 52

Front Panel of an EX4500 Switch

The front panel of an EX4500 switch consists of the following components:
40 SFP+ network ports
Network port LEDs
Two slots for installing uplink modules-Installing uplink modules is optional.
LCD panel and the LCD navigation buttons
Chassis status LEDs
Console port
Management port
Management port LEDs
USB port
ESD point
Figure 4 on page 36 shows the front panel of an EX4500 switch.
35