Unpacking And Mounting An Ex4500 Switch; Unpacking An Ex4500 Switch - Juniper EX4500 Hardware Manual

Unpacking and Mounting an EX4500 Switch

IN THIS SECTION
Unpacking an EX4500 Switch | 111
Parts Inventory (Packing List) for an EX4500 Switch | 112
Register Products-Mandatory to Validate SLAs | 113
Installing and Connecting an EX4500 Switch | 114
Mounting an EX4500 Switch | 114
Mounting an EX4500 Switch on Two Posts in a Rack or Cabinet | 115
Mounting an EX4500 Switch on Four Posts in a Rack or Cabinet | 117
Mounting an EX4500 Switch in a Recessed Position in a Rack or Cabinet | 120

Unpacking an EX4500 Switch

The EX4500 switches are shipped in a cardboard carton, secured with foam packing material. The carton
has an accessory compartment.
CAUTION:
not unpack the switches until you are ready to begin installation.
To unpack the switch:
1. Open the carton.
2. Pull out the packing material holding the switch in place.
3. Verify the parts received against the inventory on the label attached to the carton. See
(Packing List) for an EX4500 Switch" on page
4. Save the shipping carton and packing materials in case you need to move or ship the switch later.
EX4500 switches are maximally protected inside the shipping carton. Do
112.
111
"Parts Inventory