Juniper EX4500 Hardware Manual page 186

Table 61: Chassis Viewer for XRE200 External Routing Engines
Field
Front View
Interface status
Console port
Management (me0) port
Virtual Chassis port
LCD panel
Temperature
USB port
PIC1 slot
PIC2 slot
Description
In the image, the colors listed below denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
For a Virtual Chassis configuration, select the switch to view the interface status.
The console port is used to connect the switch to a management console or to a console
server.
The management port is used to connect the switch to a management device for
out-of-band management. Use this port for initial switch configuration.
In the image, the colors listed below denote the Virtual Chassis port (VCP) status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Mouse over the interface (port) to view more information.
LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current
character display.
The active slots contain a gray temperature icon. Mouse over the icon to display
temperature information for the slot.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
You can install a Virtual Chassis module in the PIC1 slot. Mouse over the Virtual Chassis
ports to display the port status details.
You can install a Virtual Chassis module in the PIC2 slot. Mouse over the Virtual Chassis
ports to display the port status details.
186