Juniper EX4500 Hardware Manual page 180

Table 55: Chassis Viewer for EX4550 Switches (continued)
Field
Virtual Chassis port
Power supplies
PIC2 slot
Table 56: Chassis Viewer for EX4600 Switches
Field
Front View
NOTE: J-Web is supported on EX4600 switches only in J-Web Application package Release 14.1X53-A2.
Interface status
PIC 1 and PIC 2 slots
Description
Displayed only when switches are configured as a Virtual Chassis. In the image, the colors
listed below denote the Virtual Chassis port (VCP) status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Mouse over the power supply icons to display name, status, and description information.
You can insert an uplink module or a Virtual Chassis module into the PIC2 slot. Mouse over
to display the details of the module inserted (uplink or Virtual Chassis).
Description
In the image, the colors listed below denote the interface status for both copper
and fiber media type of ports:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
You can install an expansion module in the PIC 1 and PIC 2 slots. If you have
installed an expansion module, mouse over the ports in the module to view the
details of the ports in module.
When you install a transceiver in the port, the following colors denote the interface
status:
Green—Interface is up and operational.
Yellow—Interface is up but is not operational.
Gray—Interface is down and not operational.
180