Graphical Chassis Viewer - Juniper EX4500 Hardware Manual

Graphical Chassis Viewer

The Dashboard panel displays a graphical view of the chassis of a switch. In a Virtual Chassis, it displays
a graphical view of each member switch.
In a Virtual Chassis, the default values are shown on the Dashboard panel when no chassis image is clicked.
The panel displays the value for a switch if you click its image.
NOTE:
If the member switch is not present, inactive, or not provisioned, you cannot expand the
member switch image.
In J-Web Application package Release 14.1X53-A2, you can form a Virtual Chassis using
EX4600 and EX4300 switches. When in a mixed Virtual Chassis consisting of EX4600 switches
and EX4300 switches, the EX4600 switches can be the primary, backup, or in the linecard role,
while the EX4300 switches must be in the linecard role.
Starting in J-Web Application Package Release 19.2A1, J-Web supports EX4650 switches.
NOTE: For EX4650 switches, chassis viewer supports only the standalone view and
does not support the Virtual Chassis configuration.
Table 45 on page 161 lists the details that are displayed on each member switch.
Table 45: Details of a Virtual Chassis Member Switch
Details
Model number of the member switch
Assigned ID that applies to the entire Virtual Chassis
configuration
Role of the member switch
Status of the member switch
Example
EX3300
ID 2
NOTE: If the member switch is not provisioned, the serial
number of the switch is displayed instead of its ID.
Master
Possible roles are: Master, Backup, or Linecard
Prsnt
Possible statuses are: Prsnt, NotPrsnt, Inactive, or Unprvsnd
161