Juniper EX4500 Hardware Manual page 123

Table 43: Parts Required for Connecting an EX Series Switch to Earth Ground (continued)
Earthing
Terminal
Switch Location
EX2300-C Rear panel of
the chassis
EX2300 Rear panel of
the chassis
Grounding
Cable Grounding Lug
Requirements Specifications
14 AWG (2 mm²), Panduit
minimum 90° C LCC10-14AW-L or
wire, or as equivalent—
permitted by the not provided
local code
EX2300 EX2300 switches
switches except
except EX2300-24MP and
EX2300-24MP EX2300-48MP
and models—Panduit
EX2300-48MP LCC10-14AW-L or
models—14 equivalent—not
AWG (2 mm²), provided
minimum 90°C
EX2300-24MP and
wire, or as
EX2300-48MP
permitted by
models—Panduit
the local code
LCA10-10L or
EX2300-24MP equivalent—not
and provided
EX2300-48MP
models—14-10
AWG STR
(2.5-6 mm²),
12-10 AWG
SOL (4-6 mm²)
minimum 90°C
wire, or as
permitted by
the local
code—not
provided
Screws and Additional
Washers Information
Two
10-32 x .25 in.
screws with
#10 split-lock
washer—
not provided
Two #10 flat
washers—not
provided
EX2300
switches
except
EX2300-24MP
and
EX2300-48MP
models
Two 10-32 x
.25 in.
screws with
#10
split-lock
washer—not
provided
Two #10 flat
washers—not
provided
EX2300-24MP
and
EX2300-48MP
models
One Pan
Phillips M 4
x 6 mm
Nickel
plated
screw—provi d ed
123