Juniper EX4500 Hardware Manual page 248

To view the active alarms:
1. Select Monitor > Events and Alarms > View Alarms in the J-Web interface.
2. Select an alarm filter based on alarm type, severity, description, and date range.
3. Click Go.
All the alarms matching the filter are displayed.
NOTE: When the switch is reset, the active alarms are displayed.
Meaning
Table 64 on page 248 lists the alarm output fields.
Table 64: Summary of Key Alarm Output Fields
Field Values
Type Category of the alarm:
Severity Alarm severity—either major (red) or minor (yellow or amber).
Description Brief synopsis of the alarm.
Time Date and time when the failure was detected.
SEE ALSO
Monitor System Log Messages | 249
Dashboard for EX Series Switches | 160
Understand Alarm Types and Severity Levels on EX Series Switches | 241
Chassis—Indicates an alarm condition on the chassis (typically an environmental alarm such
as one related to temperature).
System—Indicates an alarm condition in the system.
248