List Of Dac Cables Supported On Ex Series Switches; Standards Supported By These Cables - Juniper EX4500 Hardware Manual

Figure 29: SFP+ Direct Attach Copper Cables for EX Series Switches
The cables are hot-removable and hot-insertable: You can remove and replace them without powering
off the switch or disrupting switch functions. A cable comprises a low-voltage cable assembly that connects
directly into two 10-Gigabit Ethernet ports, one at each end of the cable. The cables use high-performance
integrated duplex serial data links for bidirectional communication and are designed for data rates of up
to 10 Gbps.

List of DAC Cables Supported on EX Series Switches

For the list of DAC cables supported on EX Series switches and the specifications of these cables, see:
EX2300—Hardware Compatibility Tool page for EX2300
EX3200—Hardware Compatibility Tool page for EX3200
EX3300—Hardware Compatibility Tool page for EX3300
EX3400—Hardware Compatibility Tool page for EX3400
EX4200—Hardware Compatibility Tool page for EX4200
EX4300—Hardware Compatibility Tool page for EX4300
EX4500—Hardware Compatibility Tool page for EX4500
EX4550—Hardware Compatibility Tool page for EX4550
EX4600—Hardware Compatibility Tool page for EX4600
EX8208—Hardware Compatibility Tool page for EX8208
EX8216—Hardware Compatibility Tool page for EX8216
EX9251—Hardware Compatibility Tool page for EX9251
EX9253—Hardware Compatibility Tool page for EX9253

Standards Supported by These Cables

The cables comply with the following standards:
SFP mechanical standard SFF-843— see ftp://ftp.seagate.com/sff/SFF-8431.PDF.
Electrical interface standard SFF-8432— see ftp://ftp.seagate.com/sff/SFF-8432.PDF.
86