Juniper EX4500 Hardware Manual page 175

Table 52: Chassis Viewer for EX3200, EX3300, and EX4200 Switches (continued)
Field
Fan tray
Virtual Chassis port
USB port
Management (me0) port
Console port
Power supplies
Table 53: Chassis Viewer for EX4300 Switches
Field
Front View
Interface status
LCD panel
Mini USB console
Description
Mouse over the fan tray icon to display name, status, and description information. For a
Virtual Chassis, the status of the fans of the selected member switch is displayed.
Displayed only when EX4200 switches are configured as a Virtual Chassis. The following
colors denote the Virtual Chassis port (VCP) status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
The management port is used to connect the switch to a management device for
out-of-band management.
The console port is used to connect the switch to a management console or to a console
server. (You might do this for initial switch configuration.)
Mouse over the power supply icons to display name, status, and description information.
Description
In the image, the colors listed below denote the interface status for both copper and fiber
media type of ports:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current
character display.
The mini console port is used to connect the switch to the management console.
175