Connecting And Configuring An Ex Series Switch (Cli Procedure) - Juniper EX4500 Hardware Manual

}
xe-0/2/2 {
unit 0 {
family ethernet-switching;
}
}
xe-0/2/3 {
unit 0 {
family ethernet-switching;
}
}
}
protocols {
igmp-snooping {
vlan all;
}
rstp;
lldp {
interface all;
}
lldp-med {
interface all;
}
}
ethernet-switching-options {
storm-control {
interface all;
}
}

Connecting and Configuring an EX Series Switch (CLI Procedure)

There are two ways to connect and configure an EX Series switch: one method is through the console by
using the CLI and the other is by using the J-Web interface.
NOTE: EX2200-24T-4G-DC switches do not support switch connection and configuration
through the J-Web interface.
This topic describes the CLI procedure.
149