Juniper EX4500 Hardware Manual page 181

Table 56: Chassis Viewer for EX4600 Switches (continued)
Field
NOTE:
In EX4600 switches the LEDs are seen in the front panel; these are not active.
In EX4600 switches there is no LCD panel.
Rear View of the EX4600 Switch
Management port
Console port
USB port
Fan tray
Power supplies
Table 57: Chassis Viewer for EX4650 Switches
Field
Front View
SFP28 and QSFP28 Ports
Rear View
Management port
Virtual Chassis ports
Console port
Description
The management ports (RJ-45 and SFP) is used to connect the switch to a
management device for out-of-band management.
The Console port (RJ-45) is used to connect the switch to a management console
or to a console server.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper
Networks for your EX Series switch.
Mouse over the fan tray icons to display name, status, and description information.
Mouse over the power supply icons to display name, status, and description
information.
Description
Displays 48 small form-factor pluggable (SFP28) ports and eight 100-Gbps quad
small form-factor pluggable (QSFP28) ports.
Mouse over the interface (port) to view more information.
The management port (em0) is used to connect the switch to a management device
for out-of-band management.
Not supported.
The Console port (RJ-45) is used to connect the switch to a management console
or to a console server.
181