Chassis Component Alarm Conditions On Ex4500 Switches - Juniper EX4500 Hardware Manual

Chassis Component Alarm Conditions on EX4500 Switches

This topic describes the chassis component alarm conditions on EX4500 switches.
Table 63 on page 243 lists the alarms that the chassis components can generate on EX4500 switches, their
severity levels, and the actions you can take to respond to them.
Table 63: Chassis Component Alarm Conditions on EX4500 Switches
Chassis
Component Alarm Condition
Power A power supply has been
removed from the
supplies
chassis.
An unknown power
supply is installed.
The power supply is
offline or the power
supply output has failed.
Alarm
Severity Remedy
Minor Install a power supply into the empty slot.
(yellow)
Minor Install a power supply recommended by Juniper
(yellow) Networks.
Major (red) Open a support case using the Case Manager link at
https://www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
243
or call