Juniper EX4500 Hardware Manual page 183

Table 58: Chassis Viewer for EX6210 Switches (continued)
Field Description
Power supplies Mouse over the power supply icons to display name, status, and description information.
LCD panel LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current
character display of the primary Routing Engine. The EX6210 switch has 2 LCD panels, one for
each Routing Engine. The backup Routing Engine LCD displays Backup.
Rear View of the EX6210 Switch
Fan tray Mouse over the fan tray icon to display information regarding the cooling fans.
Table 59: Chassis Viewer for EX8208 Switches
Field Description
Front View
Interface status In the image, click any line card, SRE module, or SF module to view the front view of the
selected component. In the image, the colors listed below denote the interface status:
Mouse over the interface (port) to view more information.
You can view status for the following ports on the SRE module:
Because the SF module has no ports, no status information is displayed.
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
USB port—Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
Auxiliary port—This port is unavailable.
Management (me0) port—The management port is used to connect the switch to a
management device for out-of-band management.
Console port—The console port is used to connect the switch to a management console
or to a console server. (You might do this for initial switch configuration.)
183