Chassis Component Alarm Conditions On Ex2300 Switches - Juniper EX2300 Series Hardware Manual

SEE ALSO
Dashboard for EX Series Switches | 184

Chassis Component Alarm Conditions on EX2300 Switches

This topic describes the chassis component alarm conditions on EX2300 switches.
Table 57 on page 233 lists the alarm conditions on EX2300 switches, their severity levels, and the
actions you can take to respond to them.
Table 57: Alarm Conditions on EX2300 Switches
Chassis Alarm Condition
Component
Temperature The temperature
inside the chassis
reaches the yellow
alarm limit.
The temperature
inside the chassis
reaches the red alarm
limit.
The temperature
sensor has failed.
Alarm Remedy
Severity
Minor
•
Check the fan.
(yellow)
•
Open a support case using the Case Manager link
at https:/ /www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
Major (red)
•
Check the fan.
•
Open a support case using the Case Manager link
at https:/ /www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
Major (red) Open a support case using the Case Manager link at
https:/ /www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
or call
or call
or call
233