Clock And Calendar Function - A&D GX-M Series Instruction Manual

11-7 Clock And Calendar Function

The balance is equipped with a clock and calendar function.
When the Clock and Calender function （dout、 5-td） is set, the time and
date are added to the output data.
Set or confirm the time and date as follows:
Operation
1. Press and hold the SAMPLE key (for 2 seconds) until
the function table is displayed in the weighing mode, then release the key.
2. Press the SAMPLE key several times to display Cl adj .
3. Press the PRINT key.
The balance enters the mode to confirm or set the time and date.
Confirming the time
4. The current time is displayed with all the digits blinking.
□ When the time is not correct and is to be changed, press the RE-ZERO
key and go to "5".
□ When the time is correct and the date is to be confirmed, press the SAMPLE
key and go to "6".
□ When the time is correct and the date does not need to be confirmed,
press the CAL key and go to "8".
Setting the time
5. Set the time in 24-hour format using the following keys.
key .... To increase the value by one.
RE-ZERO
(＋)
key ......... To decrease the value by one.
MODE
(－)
SAMPLE key .......... To select the digits to change the value.
PRINT key .............. To store the new setting, display
CAL key .................. To cancel the new setting and go to "6"
Confirming the date
6. The current date is displayed with all the digits blinking.
□ To change the display order of year (y), month (m) and day (d),
press the MODE key. The date is output in the order as
specified.
□ When the date is not correct and is to be changed, press the RE-ZERO
key and go to "7".
□ When the date is correct and the operation is to be finished, press the CAL
key and go to "8".
□ When the time is to be confirmed again, press the SAMPLE key and go
back to "4".
The selected digits blink.
"6".
ba5fnc
end and go to
58
Press and hold
(for 2 seconds)
of
Press several times
Confirm the time
Set the time
Store the time
Confirm the date
Set the date
Store the date