Clock And Calendar Function - A&D GX-300 Instruction Manual

10-9 Clock and Calendar Function

The balance is equipped with a clock and calendar function. When the "GLP output (info)"
parameter is set to "1" or "2" and the "Time/Date output (5-td)" parameter is set to "1", "2" or "3", the
time and date are added to the output data. Set or confirm the time and date as follows:
Operation
1 Press and hold the SAMPLE key until
the function table is displayed.
2 Press the SAMPLE key several times to display
Cl adj .
3 Press the PRINT key. The balance enters the mode to
confirm or set the time and date.
Confirming the time
4 The current time is displayed with all the digits
blinking.
When the time is correct and the date does not
need to be confirmed, press the CAL key and
proceed to step 8.
When the time is correct and the date is to be
confirmed, press the SAMPLE key and proceed to
step 6.
When the time is not correct and is to be changed,
press the RE-ZERO key and proceed to step 5.
Setting the time (with part of the digits blinking)
5 Set the time in 24-hour format using the following
keys.
SAMPLE key
RE-ZERO key
MODE key
PRINT key
CAL key
ba5fnc of
To select the digits to change
the value. The selected digits
blink.
To increase the value by one.
To decrease the value by one.
To store the new
display end and go to step
6.
To cancel the new setting and
go to step 6.
46
setting,